After the installation of either an Eibach Pro-Kit or Sportline spring set, a vehicles alignment should always be checked. Once lowered, a wheels camber may become increasingly negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in peculiar handling and accelerated tire wear. Eibach offers a complete range of alignment kits which offer a simple, affordable solution to adjust negative camber. These alignment kits not only assist in adjusting a vehicles camber back to factory specifications but they also allow the experienced chassis tuner to utilize the increased adjustment range to dial-in a performance alignment that uses negative camber to maximize a chassis potential. Turn-in becomes more precise and handling increasingly crisp and predictable. High-speed stability is also enhanced making an alignment kit from Eibach almost a necessity for the serious performance tuner. Manufactured by Specialty Products Company for Eibach.
The 3571 adjuster is the only kit on the market with OE style rubber bushings to eliminate the squeaks associated with polyurethane. The new 3571 adjuster replaces the non-adjustable front/rear upper control arm anchor bolts and provides adjustment from -0.75 to +1.00 degrees for prolonged tire life and improved handling. Engineered for strength, safety, and ease of installation, the 3571 is the only adjuster with OE ride quality.
Specialty Products Company - Front Camber adjuster - These adjustable upper ball joints make front camber adjustments by replacing the factory ball joint, this sliding ball joint allows for greater camber changes than previously available. Incorporating an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride.
*Note
If the notes on the item indicate EZ Cam, it means this is camber bolts and that no adjustable ball joints are available for your vehicle.
These camber bolt kits, EZ CAM XR (12MM - PAIR) EZ Cam(tm) XRs are designed for non-slotted struts. They allow both positive and negative camber changes up
to approximately 1.75¡ (depending on vehicle) by replacing the upper O.E.
strut/spindle bolt. This easy to use adjuster provides built-in adjustment
over the life of a vehicle just by rotating the head of the bolt. Each kit
contains two cam bolt assemblies, enough for both sides of the vehicle.
Specialty Products Company - Rear Camber adjuster - EZ Arms XR make rear camber adjustment possible on cars that have been lowered for performance and for those that retain the stock ride height. Simply replace the OE arm with the EZ Arm XR, and you can adjust the rear camber.
Eibach
Ingalls
SPC Performance
