Comptech Tie Bar / Rear Lower Tie bar eliminates flexing common in low-mounted rear control arms, improving stability and handling in all driving situations.
DC Sports Titanium Strutbars have a race-inspired design which is the lightest strongest strut bar available. They virtually eliminate body flex for improved handling and drivability. Manufactured from ultra light 6AI-4V aerospace titanium with titanuim mounting pads. TIG-welded fittings and mounting pads ensure lasting durability. Mounts directly to strut tower with no modifications required. Includes comprehensive instructions and all necessary hardware.
Addition of suspension upgrades such as springs, shocks, and high performance tires adds additional stress to the chassis which results in chassis flex. GREX strut tower braces imporve chassis rigidity and reduce chassis flex. By using a monocoque aluminum tube shaft, high strenght and rigidity is obtained without unnecessary weight gain. The brace length can be adjusted from both sides which simpliefies installation.
The NEUSPEED Upper Front Strut Tie-Bar is a must for all cars from street to all-out competition. The NEUSPEED bar takes the roll and twist out of the sheet-metal frame
an inherently weak spot. Unlike hinged, single-bolt designs which flex and pivot, the NEUSPEED bars solid mounting is very rigid, making steering quicker and more responsive to your touch. You will feel the difference in handling! This bar is especially important if you change to larger tires. Our lightweight twin-tube design easily bolts to the strut towers, a strong point on each side of the body, to provide maximum performance with the greatest strength. All NEUSPEED bars are made from heavy-wall, 3/4-inch and 7/8-inch diameter steel tubing (98 Accord, 95-99 Eclipse, Golf IV and Jetta IV use 1 inch tubing) aircraft heliarc welded to 1/4-inch steel mounting plates, and feature a wet-look gloss black powder-coat finish. NEUSPEED now offers polished upper strut tie-bars. These new bars are chrome plated to a mirror finish. NEUSPEED bars install in minutes on most applications by bolting to the factory strut/tower retaining studs or bolts. Some VW applications may require drilling four holes by marking the self-aligned Strut Tie-Bar and installing special aircraft threaded Nutserts with the tool provided. Each Nutsert withstands over 800-lbs pull and provides the greatest strength to tie in the front body panels. NEUSPEED Strut Tie-Bars fit with all standard factory equipment, and all service work is performed in the normal manner. NEUSPEED was the first... and is by far the best strut tie-bar on the market.
Sustec Strut Tower Bar
Whenever driving aggressively, a vehicle"s suspension can only work just a hard as the stiffness of the chassis permits. Increase the rigidity of the vehicle"s frame resulting in improved, predictable handling. A reinforced lip is used to reduce bending of the bar. A specially designed bar with a hollow center and reinforced side walls for increased rigidity and reduced weight, extremely flex resistant. A polished finish for added good looks.
Comptech
DC Sports
Greddy
NEUSPEED
Tanabe
