Improve the suspension of your racecar or street car with Ground Control suspension products. We offer racing and street car suspension products designed exclusively by us to improve the handling of your car. We offer street shocks and struts, adjustable racing shocks and struts, custom springs, kits for adjusting ride-height, adjustable camber/caster plates, adjustable sway bars and more. Whether you"re racing or you just want better handling, we have what you"ll need to set up the suspension on your car for optimum performance. Ground Control, THE suspension experts.
Please note that Ground Control coilovers are sleeve/spring type coilovers!
Please check out notes for the following letters A-H
A) some shocks/struts require grinding/machining to fit coil-over hardware
B) removal of stock spring seat and welding required
C) removal of stock spring seat and welding optional for added tire clearance and range of adjustment
D) trimming of stock spring seat allows added range of adjustment
E) removal of stock spring seat required
F) includes new upper mounts and must be used with machined aftermarket struts specified
G) includes new upper mounts
H) must be used with specified shocks supplied by Ground Control (discounts do not apply to shocks
The KONI Sport Suspension Kit - 1130 Series, offers a complete package with matched KONI Sport shocks that are adjustable for rebound, externally in most cases, and matched set of KONI lowering spring. The kits lower the cars an average of 35 - 45 mm or about 1 ½ to 1 ¾ inches. This give your car a more aggressive look and handling while maintaining a good ride quality for daily street use. The kit reduces body roll and increases the responsiveness to steering input, making your car more fun to drive.
The kit consists of four KONI Sport Shocks and bright blue KONI lowering springs each carefully tested and matched per fitment to provide the best possible performance. KONI Sport Kits shocks are externally adjustable (based on fitment) to allow for even further optimization with a simple turn of the knob.
TEAS stands for 'Tanabe Electric Active Suspension and is the counterpart of the new Sustec Pro FIVE & Sustec Pro SEVEN suspension. This compact unit is the brain behind the highly sophisticated new Tanabe suspensions. TEAS is a fully programmable dampener controller that allows for dampening force to be automatically adjusted while driving. TEAS accomplishes this by connecting and using the signal from the vehicles Speed Sensor.
Remote dampening control from within the vehicle is not a new concept by any means. In fact, many Japanese vehicles from the 1980's including the FC3S RX-7 and MA70 Supra had buttons to change dampening ; Unlike other controllers that are simply an update of this older technology, TEAS is a much larger step towards highly digital advanced suspension control and tuning through its speed sensing
TEAS active dampening control is uniquely possible due to the use of the specialized valving of the SEVEN, in conjunction with TEAS; slim, high speed actuators. These actuators change dampener settings in 1/100ths of a second, which is necessary as TEAS can continuously change settings at different speeds.
SS-P offers the same great features as the Super Street, but includes pillowball upper mounts and is EDFC compatible.
More on EDFC EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force by controlling a motor installed in the shock absorber while being seated in the drivers seat.
Here is a great entry level tuned TEIN coil-over suspension kit Type Basic - that is a big step above the Sleeve Type Coilover kits with performance struts or shocks. These kits have all the high quality and high performance as all the high end Adjustable Suspension Kits, but are reasonably priced. All kits are ride height adjustable. The damping force (compression & rebound) is non-adjustable. Twin tube design allows the kit to be overhauled.
Tokico DSK / HSK Suspension Kit, includes 16 Ways Adjustable D-Spec or HKS shocks and springs.
Vehicle specific matched spring rates and proper ride height insure correct fit and function - taking the quesswork out of choosing the right suspesnion combination.
The Tokico performance loweing springs are manufactured with chrome silicone spring alloy, are heat treated, shot peened, block set, phosphate treated, power coated and carry the Tokico logo and limited lifetime warranty.
Vehicle height is lowered .05 - 1.75 inches from stock height.
Sold as Kit - Includes 4 Shocks/Struts and 4 Coil Springs
See notes for DSK or HTS
Tokico HPK Suspension Kit, includes HP non-adjustable shocks and springs.
Vehicle specific matched spring rates and proper ride height insure correct fit and function - taking the quesswork out of choosing the right suspesnion combination.
The Tokico performance loweing springs are manufactured with chrome siliconespring alloy, are heat treated, shot peened, block set, phosphate treated, power coated and carry the Tokico logo and limited lifetime warranty.
Vehicle height is lowered .05 - 1.75 inches from stock height.
Sold in Set of 4
Kit includes dampers & springs only - All upper mounts & dust covers must be reused.
Assembly Required
Ground Control
Koni
Tanabe
TEIN
Tokico
