What makes INTRAX springs better? INTRAX designs most of its lowering kits with progressive rates, to satisfy the two features you have asked for most. First, the lowered look. Most other brands springs are linear rate, as this is cost-effective but does not necessarily provide the visual effect you desire. By designing a progressive spring, we achieve the lowered look while maintaining safety standards of spring preload at suspension droop. The second requirement is ride quality. Since most of you identified that you drove 90 percent of your mileage to and from work, you wanted to retain some ride quality enjoyed with OE springs. If you are driving to work on a racetrack, Sport or Race springs from other brands may be for you. INTRAX progressive springs provide high performance looks and comfortable ride quality.
INTRAX creates the finest springs, from start to finish. INTRAX springs begin the forming process with cold winding to the most exacting standards. Within two hours of forming, springs are stress relieved in an oven (not to be confused with heat treating), and then shot peened to remove surface imperfections and further relieve internal stress. This can extend service life of a spring up to 200 percent or more. Next, the spring is blocked (wound to a longer length than required, and set in a hydraulic press to obtain designed free length). This eliminates the settling other brands require, due to the lower cost of their production processes. Finally, springs are Phosphate coated for corrosion resistance, and electrostatically powder coated to ensure a lifetime of outstanding looks.
B G Springs:
Drawing on over 150 years of spring design and manufacturing expertise, B&G S2 Sport Springs are engineered to improve handling while maintaining safety and ride quality.
By redesigning the O.E. Spring and lowering the center of gravity from 1-2.5 inches (depending on vehicle and application) our technicians dramatically improved your vehicles performance and appearance. Incorporating a progressive rate design allow B G springs to offer higher spring rates for improved road hold, while maintaining a comfortable ride for daily driving.
lowering applications from 1 to 2.5 inches
progressive spring rate design to maintain ride quality while
improving road feel and handling
cold wound from high tensile chromium silicone wire
individually super blocked and computer tested againist tight tolerances
Sportline... Lowering For The Extreme. For North America, Eibach developed Sportline spring sets for those enthusiasts who wanted the lowest possible drop for their car in order to achieve that race car look. A vehicle equipped with Eibach Sportline springs makes a dramatic statement to even the most casual observer. It also gives you the ability to back it up with superior Eibach performance. The goal of our Sportline springs is to provide extreme lowering while at the same time, provide exceptional handling through precision engineered spring rates. As with our popular Pro-Kit, Sportline springs are designed by experienced suspension engineers and manufactured using the finest alloy spring wire available and under the same Eibach quality standards. Sportline puts it all together, Race-Car looks, sportive handling and Eibach proven quality
Eibach Springs / Drag-Launch Competition-Pro-Kits are designed for Motorsports events which require the use of Original Equipment spring perches and seats.European Competitors in the demanding series types Group N, Group G, Rally, Slalom Autocross and many others depend on the performance found only in Eibach Competition-Pro-Kits. Drag-Launch-Kits are engineered to do only one thing: provide maximum traction to the drive wheels whether front or rear, import or domestic. The spring rates are precision engineered to improve weight transfer and control axle torque reaction resulting in a dramatic reduction in quarter mile times up to 2-4 tenths of a second.
Eibach Competition-Pro-Kits provide the following Benefits:
Designed to fit in Original Equipment spring perches.
Designed to lower the vehicles center of gravity.
Designed to reduce body roll, squat and dive.
Spring rates are engineered to meet the grueling demands of Motorsports competition.
*Note: for optimal performance, it is recommended that Competition-Pro-Kits are used in combination with a proper sport shock or strut approved for use with shortened competition springs.
The Eibach Pro-Truck-Systems combine both Front and Rear Pro-Truck Lowering kits into one comprehensive package.
This is the perfect choice for owners striving for the ultimate in a performance lowered truck or SUV. Springs are engineered to provide enhanced handling, a lower center of gravity, and a simply great look, getting rid of that fender well gap. The kits contain everything you need to lower your trucks ride height and achieve ultimate visual and dynamic balance. And the front and rear elements are carefully balanced to work together, assuring you of a crisp, modern look, responsive handling and a smooth, compliant ride Eibach is famous for.
Eibach Pro-Kits are designed by experienced engineers specialized in chassis dynamics and are tested by seasoned qualified drivers. They are designed to properly and safely lower your vehicles center of gravity through the use of proprietary progressive spring rates; reducing squat during acceleration, body roll in the turns, and nose dive under braking. Upon installation, your vehicle becomes exceptionally stable and secure under a much wider range of conditions and will provide years of enhanced driving pleasure, whether you are twisting your way through a mountain pass or cruising down the interstate or tempting the Autobahn.
Advantages of the Eibach Pro-Kit:
Excellent ride quality - comfortable in cruising
Sportive handling in cornering, resulting in improved performance
Lowered center of gravity, increased stability
Enhanced appearance of vehicle
Manufactured according to ISO 9001 quality system as well as T/V approved
Some owners and tuners of today SUVs and trucks prefer to customize the look and performance of their vehicles, which is why Eibach offers our Pro-Truck lowering spring kits in both Front-Only and Rear-Only packages. Installing a Front-Only Pro-Truck Kit increases the forward rake of your truck or SUV, giving it an aggressive look while improving its overall handling characteristics.
Advantages of the Eibach Pro-Truck Front-Only System:
Eibach Rear-Only Pro-Truck kits contain all the parts you need to properly lower your rear ride height, leveling out your truck or SUV for a more balanced, integrated look and feel. Every part is designed and engineered to stringent Eibach standards, and has been extensively tested to perform on your particular model vehicle. Your handling and ride will improve dramatically.
Eibach Pro-System Plus = Pro-Kit Sport Springs Pro Damper Sport Shocks Anti-Roll Kit
The Eibach Pro-System-Plus adds the final step for total suspension dominance. Pro-System-Plus kits are designed by our team of suspension engineers and ride control experts to offer the best-possible street performance, but without sacrificing ride quality. The Pro-System-Plus is a precisely balanced combination of sport springs, bump-stops (secondary springs), dampers and anti-roll bars designed and tuned to operate as a complete performance suspension system.
Pro-System-Plus improves turn-in response, increases cornering speed and reduces body roll all while retaining excellent ride quality. Pro-System-Plus is the ultimate street performance suspension system a must for any true driving enthusiast.
This is what Sport Compact Car said after road/track testing the AEM Ford Focus with Eibach Pro-System-Plus.
With the Eibach suspension, every last movement was damped out of existence. Eibach suspension was confidence inspiring in virtually any situation one of the most well-sorted aftermarket suspensions ever encountered.
*Also available as a Sport-System-Plus, which includes Sportline lowering for the lowest possible drop and over the top handling.
Super-Street Performance Without Sacrificing Ride Quality
Eibach Pro-System Plus = Pro-Kit Sport Springs Pro Damper Sport Shocks
The Eibach Pro-System-Plus adds the final step for total suspension dominance. Pro-System-Plus kits are designed by our team of suspension engineers and ride control experts to offer the best-possible street performance, but without sacrificing ride quality. The Pro-System-Plus is a precisely balanced combination of sport springs, bump-stops (secondary springs), dampers and anti-roll bars designed and tuned to operate as a complete performance suspension system.
Pro-System-Plus improves turn-in response, increases cornering speed and reduces body roll while retaining excellent ride quality. Pro-System-Plus is the ultimate street performance suspension system is a must for any true driving enthusiast.
This is what Sport Compact Car said after road/track testing the AEM Ford Focus with Eibach Pro-System-Plus.
With the Eibach suspension, every last movement was damped out of existence. The Eibach suspension was confidence inspiring in virtually any situation one of the most well-sorted aftermarket suspensions weve ever encountered.
*Also available as a Sport-System-Plus, which includes Sportline lowering for the lowest possible drop and over the top handling.
Super-Street Performance Without Sacrificing Ride Quality
H&R Race Springs .Stage. For the driver who wants the ultimate in handling ·and an over-the-top, highly aggressive look H&R Race Springs are the perfect solution. We recommend that you match these dynamic, race-spec springs (from 50 to 100 percent stiff
H&R Sport Springs Stage 2. The most popular spring in H&Rs line-up, Sport Springs will lower your vehicle an average of 1.5 - 2 inches (depending upon the make and model of your vehicle) for a lower center of gravity, improved handling and a more aggressive appearance. Sport springs feature more control than that of the OE Sport spring, but is still comfortable for daily use. Sport springs are an excellent choice for street and occasional track use.
Skunk2 Racing lowering springs give your car superior handling performance and an aggressive stance with an extra smooth ride. The same engineering and quality that goes into our racing springs also goes into all of our lowering springs. Each spring is CNC-wound using SAE 9254 spring steel, shot peen stress relieved, and corrosion protected using phosphate and powder coatings. The result is a spring that specifically offers racecar handling, yet maintains smooth and comfortable ride characteristics. Lowers approximately 2.0-2.5 inches, depending on application.
TEIN Hight.Tech springs utilize the latest spring and material technology to optimize comfort, performance, and quality. The line is produced with Vanadium (SAE9254V), which is strong, lightweight, and has properties to retain more spring stroke. High.Tech springs are designed for those seeking a slightly lowered stance while maintaining high ride quality at a reasonable price. Most vehicles will attain a 1.2 inch drop for a more attractive appearance, added performance, and excellent comfort. Included is a one year limited warranty.
TEIN S.TECH Spring is an excellent step towards suspension tuning.
They offer approximately a 1.5 inch drop for a more aggressive appearance. Comes with a 1 year limited warranty.
Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects (see limited warranty for more details).
* One year limited warranty.
* High-grade material adapted to improve guaranteed satisfaction.
* Rubber spring protector sheet to prevent noise (most applications).
ACP
BG Suspension
Eibach
HR
skunk2
TEIN
