After the installation of either an Eibach Pro-Kit or Sportline spring set, a vehicles alignment should always be checked. Once lowered, a wheels camber may become increasingly negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in peculiar handling and accelerated tire wear. Eibach offers a complete range of alignment kits which offer a simple, affordable solution to adjust negative camber. These alignment kits not only assist in adjusting a vehicles camber back to factory specifications but they also allow the experienced chassis tuner to utilize the increased adjustment range to dial-in a performance alignment that uses negative camber to maximize a chassis potential. Turn-in becomes more precise and handling increasingly crisp and predictable. High-speed stability is also enhanced making an alignment kit from Eibach almost a necessity for the serious performance tuner. Manufactured by Specialty Products Company for Eibach.
Replacing your factory upper control arms with these adjustable units will give you the added adjustability and range when fine-tuning your suspension. These front camber kits will accurately dial in your suspension setting with quick adjusting sliding ball joints. The Skunk2 Racing camber kit has been redesigned to offer over /- 4 of adjustability and is the choice of SCCA Pro Racing teams. The Pro Series Kit offers /- 5 degrees of adjustability.
Specialty Products Company - Front Camber adjuster - These adjustable upper ball joints make front camber adjustments by replacing the factory ball joint, this sliding ball joint allows for greater camber changes than previously available. Incorporating an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride. EX Cam XR adjusters require only 1 per vehicle for Fronts.
Specialty Products Company - Rear Camber adjuster - EZ Arms XR make rear camber adjustment possible on cars that have been lowered for performance and for those that retain the stock ride height. Simply replace the OE arm with the EZ Arm XR, and you can adjust the rear camber.
TEINs pillow ball (spherical bearing) upper mount is designed for each individual model of the vehicle. By remaining the positioning design of upper spring and shock absorber close to manufacture"s standards, TEINs pillow ball upper mount keeps height change to the minimum and maintains the stroke center.
Eibach
Ingalls
skunk2
SPC Performance
TEIN
