The Super Silencer is the most effective way to lower sound output from an exhaust system without sacrificing high-end power. The Silencer has also been shown to increase mid-range torque in some vehicles.
Non-Returnable, please make sure you are getting the correct silencer for your needs!
The ATS was developed as a high performance evolution to the standard tail pipe silencers available in the market today. While many people enjoy the power gains of a racing exhaust on the track, often times these systems require a silencer to be installed in the tip for use on the street. While sound output can be dramatically lowered using a non-adjustable silencer, unfortunately response and power tend to suffer due to increased exhaust gas restriction. The ATS (Active Tail Silencer) uses the same active valve technology as the PS Revolution exhaust system. The spring loaded valve is engaged and disengaged based upon exhaust gas pressure. This allows for effective sound suppression for the street, without the power loss under high load. Dyno tests have proven power levels to be nearly identical to an exhaust using no silencer at all.
* Please note that, due to the tapered tip of the N1 Evolution exhaust system the ATS Silencer WILL NOT fit properly. This is only true for the N1 EVOLUTION mufflers, all other exhaust systems will fit without problems.
Non-Returnable, please make sure you are getting the correct silencer for your needs!
Comptechs quiet tip inserts are designed to tone down your 3 1/2 inch Comptech exhaust, reducing decibel levels by 2-4db. Includes drill bit & self tapping screw. Dual Exhaust/V6 cars will need 2 inserts. Does not fit Fits 4 inch tips on NSX, 04 TL, or 04 S2000. Installation time 30min /-
HKS Silencers are stainless steel - removable inner silencers insert into the tip section of the muffler to offer an average of 7dB reduction in exhaust noise for most applications.
Non-Returnable, please make sure you are getting the correct silencer for your needs!
5Zigen
Apexi
Comptech
HKS
skunk2
Tanabe
