AEM Adjustable Fuel Pressure Regulator for Honda/Acura is constructed of 6061 T-6 billet aluminum and is capable of supporting enough fuel flow for engines in excess of 1000 horsepower. The patented interchangeable discharge ports enable the regulator s output to match the output of ANY fuel pump. AEM includes a custom barb fitting to accommodate the factory fuel hose, and the base of the regulator is tapped to accept a -6 AN fitting.
Mounts directly to O.E. fuel rail, or AEM High volume fuel rail. Adjustable from 20 psi to maximum fuel pump capacity. Manufactured and assembled in the USA.
The Aeromotive A1000-6 Injected Bypass Regulator was developed for high horsepower EFI applications. Compatible with the Aeromotive A1000 Fuel Pump, this regulator is a cousin to our widely-used A1000 Injected Bypass Regulator, delivering performance, long-life, and reliable operation.
Base pressure regulator is adjustable from 30 to 70 PSI.
Alcohol compatible.
Provides two inlet ports and one return port.
Fuel pressure will rise on a 1:1 ratio when referencing boost.
1/8 NPT gauge port.
The clear anodized finish on the body completes a truly elegant design.
The B&M Fuel Pressure Gauge Set allows for accurately measuring fuel pressure. Proper fuel pressure is critical at full throttle to prevent lean conditions. Recommended for use with CommandFlo for a complete, accurate fuel delivery tuning system.
Aeroquip anodized aluminum reusable fittings are engineered to match Aeroquip hose tolerances. Smooth brazed tube design allows excellent fluid flow. For applications involving methanol and nitromethane fuel mixtures Aeroquip offers zinc plated carbon steel fitting designed especially for these situations. Featuring a steel nipple, nut and tube with an anodized aluminum hose socket.
AQP Racing Hose features a Elastomer inner tube, partial stainless steel wire inner braid and full stainless steel outer braid reinforcement and is designed to provide unsurpassed levels of performance for your demanding applications. Now improved to offer industry leading full vacuum rating for sizes -10, -12 and -16. Use with Aeroquips Swivel and Non-Swivel Reusable Fittings.
Temperature Range: Continuous Operating from -55°F to 300°F. (-49°C to 150°C).
The new HD Water/Methanol Injection Kit is specifically designed for turbo-diesel and gas applications and includes multiple jets to suite your car or truck's power needs. The kit reduces air inlet temperatures and EGTs, which allows you to increase boost pressure and advance timing... leading to more power and safer operating conditions!
The HD Water/Methanol Injection Kit includes all the features necessary to do water/meth injection right. No hidden costs or optional components are required. Unlike other popular kits on the market, AEM includes a five-gallon tank with a fluid level sensor standard. Another standard feature is the boost-dependent, variable-flow progressive controller, which determines the amount of water/methanol mixture (up to 50 percent) to feed into the inlet stream. Flow adjustments at the inlet are made via three supplied jets that are designed to match most engine power requirements
Also, because AEM's engineers believe engine protection is a requirement, not an option, we include our Boost Safe output in every controller we design. This feature allows you to retard timing or reduce boost if the system runs out of fluid or detects an error. With an AEM HD Water/Methanol Injection Kit, you get all the best features in one low-priced kit.
The new five-gallon tank that is included in the HD Water/Methanol Injection Kit measures approximately 21-inches in length, 8-inches in width, and 10-inches in height. The tank is constructed of high-density polyethylene, which is very resistant to chemicals and moisture, making the material ideal for your water/methanol mixture. In addition, mounting the reservoir will be safe and secure with reinforced 1-inch mounting tabs that are located at each corner.
KEY FEATURES
* Kit includes everything needed for installation
* Large-capacity 5-gallon reservoir with integral fluid level sensor
* Boost Safe lets you retard the timing or reduce boost if the system runs out of fluid or detects an error
* Progressive, controller-driven 150-PSI pump provides boost-dependent variable flow
* Dash light relays system status and low fluid warning
* Methanol & alcohol compatible (up to 50% in solution with water)
* Includes three jets to match your power requirements
* Includes three jets to match your power requirements
* Reduces exhaust gas temperatures (EGTs) and inlet air temps on turbo-diesel and gas applications
ACP
AEM
Apexi
Greddy
