Suspension Techniques Swaybars
|
|
|
|
|
|
|
|
Intrax Springs
|
What makes INTRAX springs better? INTRAX designs most of its lowering kits with progressive rates, to satisfy the two features you have asked for most. First, the lowered look. Most other brands springs are linear rate, as this is cost-effective but does not necessarily provide the visual effect you desire. By designing a progressive spring, we achieve the lowered look while maintaining safety standards of spring preload at suspension droop. The second requirement is ride quality. Since most of you identified that you drove 90 percent of your mileage to and from work, you wanted to retain some ride quality enjoyed with OE springs. If you are driving to work on a racetrack, Sport or Race springs from other brands may be for you. INTRAX progressive springs provide high performance looks and comfortable ride quality.
INTRAX creates the finest springs, from start to finish. INTRAX springs begin the forming process with cold winding to the most exacting standards. Within two hours of forming, springs are stress relieved in an oven (not to be confused with heat treating), and then shot peened to remove surface imperfections and further relieve internal stress. This can extend service life of a spring up to 200 percent or more. Next, the spring is blocked (wound to a longer length than required, and set in a hydraulic press to obtain designed free length). This eliminates the settling other brands require, due to the lower cost of their production processes. Finally, springs are Phosphate coated for corrosion resistance, and electrostatically powder coated to ensure a lifetime of outstanding looks.
|
|
|
|
|
|
|
SPRINT Springs
|
|
|
|
|
|
|
|
ACP 350Z Adjustable camber A-arms -Front
|
FRONT A-arms Camber Adjustable 350Z - G35 (2dr/4dr)
Upper control arms for front camber adjustability
Detailed Description
Front Upper A-Arms with camber adjustability for the 350Z and G35
Complete upper control arm replacement allowing positive and negative camber adjustment of the front wheels. These arms will allow you to either add positive camber to your wheels (EXTEND tire life) or to add negative camber (increase handling). The front suspension from the factory allows zero camber adjustability which can become a problem especially when lowering your car. Race enthusiasts also wish to add more negative camber to increase their handling without having to slam their car to achieve the desired camber. These arms will allow 1.5 degrees of positive camber, and 1.5 degrees of negative camber from the factory settings. So if your car is lowered 1.5 and the front camber is sitting at 2 degrees negative camber, these arms will allow you to bring them back out to .5 degrees negative camber.
** Will also fit the Infiniti G35 2dr and 4dr
These arms are constructed entirely out of stainless steel for its superior stiffness, strength, and corrosion resistance. They are completey TIG welded and offer a huge upgrade in strength over the factory arms. They use ENERGY SUSPENSION polyurethane bushings for increased responsiveness over the factory rubber bushings. They also use a high quality 3-piece Heim ball joint protected by a polyurethane red dust bootie. These Heim joints offer the best in suspension responsiveness and smooth operation. These Heim joints are also high serviceable and do not require any special tools to remove.
|
|
|
|
|
|
|
ACP 350Z Adjustable camber A-arms -Rear
|
Rear camber/traction PACKAGE for the 350Z and G35 (2dr and 4dr)
These adjustable camber arms will allow a full range of camber adjustment for your rear wheels. Also featuring upgraded ENERGY SUSPENSION polyurethane bushings, these arms are considerably stronger and stiffer than the factory arms.
These traction adjustable arms allow fine tuning of the rear suspension and allow slight adjustment of rear wheel toe. When lowering your car 1.5-2 inches and adjusting rear camber back to spec, your toe will need to be pulled back into spec as well, which can be achieved with these arms. They also feature high quality ENERGY SUSPENSION polyurethane bushings for increased handling. The increased stiffness of the arm and upgraded bushing help to eliminate wheel hop.
Fabricated out of stainless steel, with a stainless center turnbuckle for increased stiffness and strength. Center turnbuckle has fine threads for precise adjustability. Arms are produced in house and are precision TIG welded.
With both the camber and traction arms, you will full adjustability over your camber and toe when lowered up to 2 inch (past 2 inches and an additional modification to a factory arm is needed to bring everything back to spec, please email for details)
|
|
|
|
|
|
|
ACP 350Z Adjustable front A-arms, rear camber package!
|
Save buy buying this package of Front Upper A-Arms rear camber traction arm with camber adjustability for your 350Z and Infiniti G35
Front Upper A-Arms with camber adjustability for the 350Z and Infiniti G35
Complete upper control arm replacement allowing positive and negative camber adjustment of the front wheels. These arms will allow you to either add positive camber to your wheels (EXTEND tire life) or to add negative camber (increase handling). The front suspension from the factory allows zero camber adjustability which can become a problem especially when lowering your car. Race enthusiasts also wish to add more negative camber to increase their handling without having to slam their car to achieve the desired camber. These arms will allow 1.5 degrees of positive camber, and 1.5 degrees of negative camber from the factory settings. So if your car is lowered 1.5 and the front camber is sitting at 2 degrees negative camber, these arms will allow you to bring them back out to .5 degrees negative camber.
These arms are constructed entirely out of stainless steel for its superior stiffness, strength, and corrosion resistance. They are completey TIG welded and offer a huge upgrade in strength over the factory arms. They use ENERGY SUSPENSION polyurethane bushings for increased responsiveness over the factory rubber bushings. They also use a high quality 3-piece Heim ball joint protected by a polyurethane red dust bootie. These Heim joints offer the best in suspension responsiveness and smooth operation. These Heim joints are also high serviceable and do not require any special tools to remove.
Rear camber/traction PACKAGE for the 350Z and G35 (2dr and 4dr)
These adjustable camber arms will allow a full range of camber adjustment for your rear wheels. Also featuring upgraded ENERGY SUSPENSION polyurethane bushings, these arms are considerably stronger and stiffer than the factory arms.
These traction adjustable arms allow fine tuning of the rear suspension and allow slight adjustment of rear wheel toe. When lowering your car 1.5\"-2\" and adjusting rear camber back to spec, your toe will need to be pulled back into spec as well, which can be achieved with these arms. They also feature high quality ENERGY SUSPENSION polyurethane bushings for increased handling. The increased stiffness of the arm and upgraded bushing help to eliminate \"wheel hop\".
Fabricated out of stainless steel, with a stainless center turnbuckle for increased stiffness and strength. Center turnbuckle has fine threads for precise adjustability. Arms are produced in house and are precision TIG welded.
With both the camber and traction arms, you will full adjustability over your camber and toe when lowered up to 2 inches (past 2 and an additional modification to a factory arm is needed to bring everything back to spec, please email for details)
Detailed Description
Complete suspension package -
*camber adjustable front a-arms
*rear camber arms
*rear traction arms
note : we STRONGLY suggest getting your aligment done by a professional with a computer |
|
|
|
|
|
|
Blox Racing Lower Arm Control Bar
|
BLOX Racing LCA\'s are forged from AL6061 and are designed as direct replacements for weaker stock components. The extremely strong and light weight LCA\'s help reduce the amount of camber when lowering your vehicle\'s suspension. As a result, a wider wheel and tire combination can be used with little or no tire rubbing. BLOX Racing LCA\'s are available in hard-anodized silver or black. |
|
