AEM EMS
|
AEM Plug & Play Engine Management System (EMS) is the first of its kind and will forever change the way you look at fuel injection tuning! This user-programmable system plugs directly into a vehicles factory ECU harness and requires no additional wiring. Windows based software (2000, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. User-defined templates are easily configurable and enable tuners to establish quick keys to any pertinent information during the tuning process. The AEM EMSs infinitely-adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately deliver proper amounts of fuel and correct ignition timing for ANY boost level or operating condition.
AEMs Plug & Play Engine Management System (EMS):
- Plug & Play Technology - No additional wiring necessary
- Installs in minutes!
- Runs on Windowsâ%u201E˘ Based Software
- Base Maps included
- Onboard datalogging
- Sequential Fuel Injection
- Interactive, User-friendly Manual
- Nitrous, Boost and Knock control
- Made in the USA
- *Forced induction compatible
*Adapting hardware required for non-factory forced induction vehicles. |
|
|
|
|
|
|
AEM EMS Sensor Kits
|
AEM Plug & Play EMS Sensor Kits
AEM offers several sensor kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. *All AEM Sensor Kits come complete with three wire mating connector with 12 inch leads for ease of installation. |
|
|
|
|
|
|
AEM EMS w/UEGO Controller Only
|
AEMs Plug & Play Engine Management System (EMS) is the first of its kind and will forever change the way you look at fuel injection tuning! This user-programmable system plugs directly into a vehicles factory ECU harness and requires no additional wiring. Windows-based software (2000, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. User-defined templates are easily configurable and enable tuners to establish quick keys to any pertinent information during the tuning process. The AEM EMSs infinitely-adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately deliver proper amounts of fuel and correct ignition timing for ANY boost level or operating condition.
AEMs Plug & Play Engine Management System (EMS):
- Plug & Play Technology - No additional wiring necessary
- Installs in minutes!
- Runs on Windows Based Software
- Base Maps included
- Onboard datalogging
- Sequential Fuel Injection
- Interactive, User-friendly Manual
- Nitrous, Boost and Knock control
- Made in the USA
- *Forced induction compatible
*Adapting hardware required for non-factory forced induction vehicles. |
|
|
|
|
|
|
AEM UEGO Display Gauge (Does Not Include Sensor)
|
AEM is proud to introduce its UEGO Display Gauge! Now customers with AEM Wideband UEGO Sensor Controllers (Part 30-2300 & 30-2301 ONLY) do not need a laptop to monitor AFR.
This gauge is calibrated to work with AEM UEGO sensor controllers ONLY, and allows for accurate, real time feedback of AFR (AFR readout only).
This gauge displays one channel only, so users wishing to display two channels simultaneously will need two gauges.
AEM\"s UEGO Display Gauge includes a 0-5 Volt analog output that can be used with data-loggers or most aftermarket engine management systems, and includes an RS 232 serial data output port for data-logging without an engine management system.
These units display to 0.1 AFR and feature 24 color-coded LED display lights for immediate reference to engine AFR, and an integrated three-digit real-time display for AFR. The AEM UEGO Display Gauge is available with a silver or black bezel, and with a black or white face. |
|
|
|
|
|
|
AEM UEGO Gauges
|
AEM\"s Wideband UEGO Controller is also available in a gauge that includes a single-channel analog output with a Bosch O2 sensor in one unit!
AEMs Gauge-Type Wideband UEGO Controller features an LED readout and sweeping LED \"\"needle\"\" that changes colors as AFR changes from rich to lean. The unit\"s 52mm (2-1/16\"\") gauge housing fits in most gauge pods and can be remotely mounted virtually anywhere. No laptop required for monitoring!
- Bosch sensor included!
- 24 Color-coded LED display lights provide immediate reference to engineâ%u20AC%u2122s air/fuel ratio (AFR) or Lambda
- Integrated three-digit display reveals AFR or Lambda in real time
- User-programmable 0-5v analog output included for use with data loggers and ANY engine management system
- Ideal AFR monitoring tool for carbureted applications and engine dynamometers
- Does not oscillate AFR like narrow band sensors
- Serial data stream included for output of AFR (RS 232)
- Accurate to 0.1 AFR
|
|
|
|
|
|
|
AEM Twin-Fire Capacitive Digital Ignition Module
|
AEMs digital Multi-Channel Twin Fire Ignition is the lightest, smallest and most cost effective ignition module on the market. This unit is available in four- and eight-channel configurations, works with O.E.M. coil-on-plug and distributed spark systems, and is ideal for applications that utilize aftermarket stand-alone engine management systems.
Twin Fire Ignition module is the only capacitive discharge ignition system available with dual capacitors. This enables the AEM C2DI to produce more spark energy and voltage per spark than any other available CDI unit. AEMs exclusive Twin-Cap technology stores the energy for two distinct spark events and allows for full energy for each individual plug, including high-rpm V8s, and even on rotary engines utilizing separate leading and trailing ignition maps.
- 189mJ spark energy per capacitor
- 540v primary/54,000v secondary voltage energy
- Multi-Strike capability of up to 10 sparks per ignition trigger (20 degrees)
- Twin-Cap spark events are at full energy and can be simultaneous
- Smallest (5.5x 4.625 x 1.375) and lightest (1.5lbs) CDI on the market
- Four- or eight-channel availability
- Full spark energy with battery voltage as low as 9v
- Tachometer output included
- Extruded enclosure
|
|
|
|
|
|
|
AEM Serial Datastream Gauges
|
19 Gauges In One!
AEM%u2019s Serial Gauge plugs into the companies Programmable EMS and has the ability to read 19 channels simultaneously to provide reference for all outputs, including boost, AFR, EGT, H2O, IAT, knock, volts, RPM, vehicle speed, and more! Since it can read all channels at once, AEMs Serial Gauge eliminates the need to buy a cluster of gauges, or you can link multiple Serial Gauges together to monitor additional channels or to divide your readouts across a few gauges.
Key Features:
- Monitor 19 channels simultaneouslys like having 19 gauges in one!
- Works with AEM Programmable Engine Management Systems Only
- User-programmable datastream channels (PC interface)
- User-programmable MIN/MAX values for every channel (PC interface)
- Includes two input buttons for scrolling through displayed channels and for clearing MIN/MAX values
- 24 user-programmable LEDs and three-digit center display (PC interface)
- User-selectable alarm values include qualifiers to eliminate false warnings
- User-selectable alarm priorities in the event multiple alarms are triggered
- Two outputs included to trigger ancillary warning lights or other devices (lights not included)
- Silver and black bezels and pin guides, and black and white faceplates included for creating custom look
- Quick-Connect technology eases installation
- Standard 52mm gauge housing fits in most pods and can be remotely mounted virtually anywhere
- All necessary hardware and software included for installation
|
|
