Comptech Fuel pump
|
Comptechs high volume in-tank fuel pump, high volume/high pressure. |
|
|
|
|
|
|
Comptech Clutch/Flywheel Combo
|
The Comptech PowerGrip clutch/flywheel combos were designed to be lighter, stronger, and tougher than the stock clutch.
For Acura CL
- High Performance Street Flywheel-Clutch Package
- Flywheel/clutch combo. Single disc.
- Lighter, with improved pedal feel over stock clutch.
- Excellent for mildly to moderately modified engines (including supercharged).
- Stronger and tougher than a stock-style clutch.
- Increases throttle response and helps eliminate surging feeling at low speeds.
- 9.8 lb. flywheel (compaired to 29.5lb stock)
- 24.5 lb. total weight (with stock pressure plate & hardware)
compaired to the stock 42.6 lb assembly
For Acura NSX
High Performance Street Clutch Package
Clutch/flywheel combo. Single disc.
- Lighter, with improved(and slightly heavier) pedal feel
over stock clutch.
- Excellent for mildly modified engines and some track use. Stronger
and tougher than a stock-style clutch.
- 11 lb. lighter than 96-earlier cars and
- 19.5 lb. lighter on 97-newer cars.
- For Years: 91-03 NSX
|
|
|
|
|
|
|
Comptech Steel Flywheels
|
Comptech Lightweight Steel Flywheels - Lightweight chromoly steel weighs only 9.5 lbs. Heat treated all the way through so resurfacing it wont affect the life of it. |
|
|
|
|
|
|
Comptech transmission cooler
|
Increase the longevity of your V6 automatic transmission with the Comptech Automatic Transmission Cooler Kit. Recommended for cars with Comptechs Supercharger kit. Lower operating temps will mean more reliable operation, and less breakdown of fluids. Comptech Recommends the use of Redline High Temp ATF to help further reduce transmission temps |
|
|
|
|
|
|
Comptech Clutch Slave Upgrade
|
|
|
|
|
|
|
|
Comptech Competition Reinforced Differential Housing for S2000
|
- Developed to help retain the differential and ring gear from getting shoved out the back cover
- Housing is sold on exchange basis
- Core charge is $370 and will be added to your order (will contact you after order is placed, to add this seperatly)
- If you\\\'ve already broken yours, this core charge will not be refundable
|
|
|
|
|
|
|
Comptech Competition - High Lift spring and retainer set for NSX
|
- Dual dampened springs that allow for .470 valve lift
- Lightweight steel retainers
- Note: Must be used with Comptech High-Lift VTEC Cam Set
|
|
|
|
|
|
|
Comptech Competition - Oil Filter Adapter for NSX
|
- Bolt-on Billet Aluminum Oil Cooler adapter
- Eliminates stock oil cooler
- Bolts directly to stock oil cooler location
- Sends oil through -12 ORB (1 1/16 x 12) inlet/outlet so you can route your oil lines to an external oil cooler or accu-sump system
- Comes with Aluminum Adapter
- Does not come with any pipe fittings or any other hardware
- Race part designed for use on off-road vehicles only
|
|
|
|
|
|
|
Comptech Competition Adjustable Cam Gears for NSX
|
- Competition Adjustable Cam Gears designed to be accurate & easily adjusted
- Manufactured from Hard Anodized 6061-T6 aircraft aluminum, steel timing gears, and mounting plates
- Reduces the drag of rotating mass on the engine
- Each gear weighs nearly 50% less than the stock cam gears
- Adds adjustability for full range tuning through the entire rev range
- Laser etched with large, easy to read timing marks to make adjustment easy to reference
- All four adjustable cam gears have 6 mounting bolts to mount them to the engine
- 7th adjuster pin will only line up if the gear is in an exact timing location
- This 7th adjusting pin makes it easy to keep both front and rear banks of the NSX V6 timed equally
- Intended for use on highly modified NSX engines
- No Warranty
|
|
|
|
|
|
|
Comptech NSX Gearbox - 6 Speed Conversion Kit
|
- You supply the 6 speed transmission (from the dealer or wrecking yard - we will contact you after the order is placed with details)
- Requires Comptech Power-Grip1 or Power-Grip2 Clutch Set
- Installation time: 8 hours /-
|
|
|
|
|
|
|
Comptech Competition - Billet Steel Oil Pump Gear Set for NSX
|
- Comptech designed these gears to replace the standard powdered metal gears which can break under hard high RPM use
- Gears are CNC machined out of billet steel and heat treated for long life
- The gears are assembled in the oil pump housing and ready to install on your engine
- $750 Core Charge on customer pump housing (we will contact you after your order is placed with instructions
- Installation time: 11 hours /- w/engine installed
|
