CoverCraft Covers -Multibond Ready-Fit
|
CoverCraft Car Cover 200 Series / Multibond® Custom Patterned Car Covers
Kimberly-Clark developed BLOCK-IT 200 Series fabric to be a mid-price leader in quality and performance. It uses 3-layer polypropylene construction for moisture and dust resistance, and the fibers are treated for extra UV resistance. If you are looking for an inexpensive cover for indoor storage and limited outdoor use, this U.S. made fabric offers good, basic protection and is an excellent value.
Lightweight - Easy to use and less bulky for compact storage.
Soft & Non-Abrasive - Will not scratch clean paint or clear-coat.
Breathable - Allows moisture and condensation to evaporate.
Moisture, Mold & UV Resistant
Good Dust Protection - When used indoors, keeps vehicle cleaner than most woven fabrics.. |
|
|
|
|
|
|
CoverCraft Technalon Custom Fit Covers
|
Technalon covers (made with Block-It Evolution® fabric) feature 4-layer polypropylene construction for maximum protection in all weather conditions. Often imitated, but never equaled, this U.S. made fabric is used by millions of satisfied car enthusiast around the world. Naturally Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric. Breathable - Dries quickly because air can easily circulate through the fabric. Dust / Pollution Barrier - The two middle layers of Evolution fabric act as a filtration barrier against most airborne pollutants as small as 0.1 microns (smaller than talc). Impact Absorption - 4-layer thickness absorbs impacts better than any other vehicle cover fabric to help protect the finish from nicks, dings, dents and scratches. Easy To Use - Since the fabric is breathable, it doesnt trap air and parachute during installation and removal. It also will not shrink or stretch and retains its tailored shape. Four (4) Year Limited Warranty - Against defects in workmanship and/or the fabric becoming unserviceable during normal use. Covercraft will repair or replace, to the original purchaser, after required inspection. |
|
|
|
|
|
|
CoverCraft NOAH Custom Fit Covers
|
A great value for outdoor protection.
NOAH barrier fabric actually stops water, yet it breathes to allow any trapped moisture, seam seepage or condensation to easily evaporate. The unique patented construction process results in a cover with maximum all-weather protection...highly water resistant, dust resistant, UV resistant and breathable to make sure moisture and/or heat does not stay under the cover. Made in the U.S. by Kimberly-Clark, the fabric weighs only 4.45 oz./sq. yd., so it is easy to handle and fold.
Protective Outer Layers - A bi-component spunbond, using sheath-core technology. The inner core is polypropylene for strength, with a polyethylene wrap for softness. A silver-gray color was selected because of its heat-resistant properties. The fabric is also treated with UV inhibitors for extended outdoor use.
Micro-Porous Middle Layer - barrier layer is breathable film, a proprietary stretch-film technology developed exclusively for Kimberly-Clark. The film is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust, yet large enough to allow moisture vapor to escape.
Soft, Paint-Protecting Inner Layer - A bi-component fabric made with polyethylene and nylon. This combination results in an exceptionally high strength-to-weight ratio, with the soft touch necessary for todays water-based paint finishes. |
|
|
|
|
|
|
CoverCraft WeatherShield Custom Fit Covers
|
Originally developed for outdoor performance wear, the Nextec® encapsulation process uses precision and controlled placement of proprietary polymers to make ordinary fabrics extraordinary! This patented encapsulation process places an ultra-thin film around the fabric fibers and precisely places a durable, breathable barrier within the woven polyester fabric to complete the high performance process. Unlike traditional coatings and laminations that just protect one side of the fabric, Nextec uses up to 40 computerized process controls to place protective polymers inside the fabric, to shed water, and stop dust, bird droppings, tree sap and industrial pollutants from reaching your vehicles finish. The result is a fabric that provides maximum protection, but isnt bulky and hard to store Using Nextec encapsulation technology we have created the ultimate car cover...and we named it WeatherShield because no other fabric has every shielded your car or truck from the elements like this one! The base, high-strength, polyester fabric is naturally UV resistant, but weve added UV inhibitors to the polymers to help slow down the degradation that occurs naturally to anything exposed to sun for an extended period of time.
Sheds Water - Encapsulation process assures fabric sheds water as soon as it hits the cover. Superior Dry Time - Because the fabric sheds moisture it has an absorption factor of only 2 percent, compared with up to 40 percent for standard woven and non-woven fabrics. That means, if the cover has been sitting out in the rain you only need to shake it and the residue moisture will easily dry, in the trunk or on the car. Breathable - Allows any heat or condensation under the cover to easily escape. UV Resistant - Special additives prevent UV degradation and protect the vehicles finish and interior. Dust-proof - Patented fiber encapsulation process prevents dust from filtering through the fabric. Scratch-less - Polymers provide a silky smooth finish to the fabric and provide superior paint protection. Nextec fabric has been tested at 1,000 cycles on abrasion wheels without scratching (surface must be clean and waxed). Durable - The encapsulation process is not affected by heat or cold and the process wont degrade over the life of the fabric. Easy Care - Unlike non-woven fabrics you can clean the WeatherShield cover in your HOME washer and dryer. Packs Small & Light - All this protection in a lightweight package that packs into 1/4 to 1/2 the volume of multi-layer, non-woven fabrics. Minimal storage space, but maximum protection! |
|
|
|
|
|
|
CoverCraft Sunbrella Custom fit Covers
|
The ultimate fabric for intense sun environments.
Thanks to its unique construction process, Sunbrella provides protection and years of service in intense sun areas like Arizona and other areas of the Sunbelt, where UV rays will rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in long-wearing marine fabrics for bimni tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to its ability to provide UV blockage with a rich, woven finish. The acrylic fibers are solution dyed before the fabric is woven to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a car cover fabric. The fabric is exceptionally strong and, coupled with its UV resistance, it also makes an excellent cover for RVs and trailers that spend extended time stored outside.Long Lasting Strength - Acrylic fibers suffer minimal loss of strength from exposure to heat, moisture and UV.
Fade Resistant - Colors are a result of pigments which are actually built into the fibers (solution dyed), instead of just dying the finished fabric.
Water Resistant - Treated for moisture resistance (but remember, this material is primarily for UV protection).
Rot, Mildew Resistant - Acrylic fibers resist growth that occurs in moist environments. |
|
|
|
|
|
|
CoverCraft Technalon Ready-Fit Covers
|
Technalon covers (made with Block-Itâ%u201E˘ Evolution® fabric) feature 4-layer polypropylene construction for maximum protection in all weather conditions. Often imitated, but never equaled, this U.S. made fabric is used by millions of satisfied car enthusiast around the world. Naturally Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric. Breathable - Dries quickly because air can easily circulate through the fabric. Dust / Pollution Barrier - The two middle layers of Evolution fabric act as a filtration barrier against most airborne pollutants as small as 0.1 microns (smaller than talc). Impact Absorption - 4-layer thickness absorbs impacts better than any other vehicle cover fabric to help protect the finish from nicks, dings, dents and scratches. Easy To Use - Since the fabric is breathable, it doesnt trap air and parachute during installation and removal. It also will not shrink or stretch and retains its tailored shape. Four (4) Year Limited Warranty - Against defects in workmanship and/or the fabric becoming unserviceable during normal use. Covercraft will repair or replace, to the original purchaser, after required inspection. |
|
|
|
|
|
|
CoverCraft MM Series Car Bra (2 piece)
|
Covercraft MM Series Full front mask - Hood opens with the mask in place. For maximum protection you cant beat a full front mask. They cover the bumper area (some truck models do not cover the bumper, to allow for installation of lights, grille guards, etc.) and the leading portion of the hood area. MM Series masks are a little more difficult to install, since the hood piece is separate and must be lined up with the fender area mask for a good installation. But the finished product is worth the effort! Covercraft usually screens radiator openings because they feel it"s important to protect the maximum front area possible. Covercraft has done plenty of testing over the years to confirm that the screen does not increase the engine temperature. There are some applications that just wont allow the use of screening. Some applications, like Firebirds and some Corvette models, have the hood opening so far back that a hood piece isnt required. |
|
|
|
|
|
|
CoverCraft M Series Car Bras
|
CoverCraft M Series Front nose masks - Traditional one-piece styling front mask
Originally, masks were designed as one-piece units, for ease of installation and maximum protection. This made them easy to use at the factory test track. Over the years mask design has evolved into the two-piece style, but there are still some patterns for older specialty vehicles that are in the one-piece M Series design. |
|
|
|
|
|
|
CoverCraft MH Series Deflectors for Cars
|
Covercraft MH Series Deflectors for cars. At the top of the hood curve, Covercraft has added a reinforced bug deflector that creates a swirling wind action to divert most bugs, dirt and debris away from the windshield. Unlike hard plastic bug deflectors, the Covercraft Deflector-Protector Mask can be removed in minutes and stored in the trunk. There are no holes to drill or hardware to attach as it installs quickly and easily using an envelope design and tightening strap under the hood to hold it securely in place. |
|
|
|
|
|
|
CoverCraft MD Series Deflectors for Truck & Vans
|
Covercraft MD Series Deflector for Trucks, SUV and Vans. At the top of the hood curve, Covercraft has added a reinforced bug deflector that creates a swirling wind action to divert most bugs, dirt and debris away from the windshield. Unlike hard plastic bug deflectors, the Covercraft Deflector-Protector Mask can be removed in minutes and stored easily, such as behind the backseat in a pickup. There are no holes to drill or hardware to attach as it installs quickly and easily using an envelope design and tightening strap under the hood to hold it securely in place. |
|
|
|
|
|
|
CoverCraft FormFit Ready-Fit Covers Indoor
|
Designed for cars that are not daily drivers, Covercrafts new Form-Fit covers provide a body-hugging fit AND a super soft inside to pamper fine paint finishes.
We start with an outer shell of woven polyester that has Lycra/Spandex added to the yarns to provide STRETCH and memory - the stretch provides the body-hugging fit and the memory assures the cover will retain its shape over an extended period of time (they have a 4-year warranty).
The inside fibers are 100 percent cotton terry loop which is sheared to a fleece-like finish. The end result is a 7.4 oz sq. yd. material that has a great hand, or feel.
This cover will provide some ding & dent protection for a garage parked vehicle and the fabric is highly breathable to prevent vapor and heat from becoming trapped under the cover. Form-Fit covers are available in six (6) colors.
Since these covers require special patterns, applications are limited. Check for availability. Covers are supplied complete with a matching fabric storage bag.
|
|
