Intercoolers

Acura
Audi
Dodge
Honda
Infiniti
Mazda
Mitsubishi
Nissan
Scion
Subaru
Toyota
VW

Apexi
Greddy
HKS
InJen

IAutoCarParts offers intercoolers from the top names in the industry. We carry Apexi, HKS, Injen and GReddy.

Apexi

Apexi Intercooler - GT

Apexi GT Intercoolers use a highly efficient delta-fin core design specifically engineered for front-mount applications. Staggered inner-fins also provide considerably more cooling than non-staggered designs. Pressure drop is kept to a minimum on the GT Interco

Greddy

GReddy Intercooler Kits	The addition of a GReddy intercooler is one of the best ways to safely increase horsepower in a turbocharged engine. By reducing the engine"s inlet temperatures, a denser air charge will enter the engine; this can make more horsepower at the same boost level and even more power at higher boost levels. Even if there is a factory-installed intercooler, generally these stock units are undersized even for factory boost levels. They are usually mounted in awkward locations and become very susceptible to heat saturation. They are not ideal for increased boost levels. Our vehicle specific kits include all the necessary mounts, piping and hoses required to install the kit. All kits are designed with specific cores to provide an ideal compromise of cooling and flow, with the added benefit of style. This is achieved by finding an ideal position and configuration for a wide range of boost levels. Our engineers properly size the number of rows in the core and tune the internal core with either a V-spec. core or with a different inner fin pattern in the R-spec core. All cores are of a lightweight air-to-air, tube and fin design. The high efficiency tube design allows smooth ambient flow for optimum heat dissipation and flow to engine cooling systems unlike typical heavy bar and plate types that disturb ambient flow like a wall, or wing shaped tubes types which flow ambient air so fast there is little time for heat transfer. GReddy intercoolers offer the perfect balance of heat exchanging efficiency and flow. The ends of the cores are TIG-welded and capped off with our smooth flowing heavy-duty cast aluminum GReddy endtanks. Light-weight mandrel bent aluminum piping and/or cast aluminum elbows, complete with hose cuplers, are used to route air charge smoothly to and from the intercooler.



GReddy Intercooler Set-up Kits	Intercoolers for GReddy Turbo kits use the same thick cast end-tanks and tube and fin type cores as our traditional intercooler kits. They are also bolt on kits designed for a specified application. All mounts and hardware bolt onto your vehicle with minimal modifications.



GReddy Intercooler Piping Kits	These kits do not include any intercoolers. They are support items to either change the soft factory hoses to hard pipes or high capacity replacements that allow for re-routing. Universal kits are available for custom making intercooler compresion pipes.

HKS

HKS Intercooler Kit	HKS Intercooler kits are application specific upgrade kits for factory intercooled turbocharged vehicles. Designed individually for each application, intercooler size and placement are calculated for maximum efficiency and performance. The intercooler upgrade kits that are designed to mount in the factory intercooler location are enhanced in overall size, flow capacity and cooling efficiency well over the capability of the stock units. Each HKS Intercooler kit utilizes an application specific tube and fin intercooler core with cast aluminum endtanks, as well as mandrel bent intercooler pipes and silicone joint hoses. The metal intercooler piping of each kit, which replaces the stock rubber hoses that tend to expand under boost, offer increased durability, consistent boost pressure, better response and an attractive appearance. All the necessary brackets, hardware and fittings are also included for a complete bolt on installation. All application specific HKS Intercooler systems and upgrade kits are CARB exempt. (CARB E.O. #D-186-21).



HKS Intercooler Pipe Kit	HKS Intercooler Pipe Upgrade kits increase efficiency & performance over the factory intercooler pipe system. The use of metal intercooler piping offers increased durability, consistent higher boost pressure, improved response & an attractive appearance.

InJen

Injen SES Front Mounted Intercooler

Intercooler Dimensions (inches)
24 x 6.25 x3

* Front Mount Design
* 6061 T6 Mandrel Bent Piping
* Replacement Coolant Reservoir Bottle
* Complete bolt on, no frame modification.
* Retains factory foglight function.
* Removes Heat Soaked underhood intercooler.

FREE Shipping

Support | Customer Feedback | My Account
News | All Products | Site Map