Neuspeed Front Upper Strut Tie-Bar
|
The NEUSPEED Upper Front Strut Tie-Bar is a must for all cars from street to all-out competition. The NEUSPEED bar takes the roll and twist out of the sheet-metal frame
an inherently weak spot. Unlike hinged, single-bolt designs which flex and pivot, the NEUSPEED bars solid mounting is very rigid, making steering quicker and more responsive to your touch. You will feel the difference in handling! This bar is especially important if you change to larger tires. Our lightweight twin-tube design easily bolts to the strut towers, a strong point on each side of the body, to provide maximum performance with the greatest strength. All NEUSPEED bars are made from heavy-wall, 3/4-inch and 7/8-inch diameter steel tubing (98 Accord, 95-99 Eclipse, Golf IV and Jetta IV use 1 inch tubing) aircraft heliarc welded to 1/4-inch steel mounting plates, and feature a wet-look gloss black powder-coat finish. NEUSPEED now offers polished upper strut tie-bars. These new bars are chrome plated to a mirror finish. NEUSPEED bars install in minutes on most applications by bolting to the factory strut/tower retaining studs or bolts. Some VW applications may require drilling four holes by marking the self-aligned Strut Tie-Bar and installing special aircraft threaded Nutserts with the tool provided. Each Nutsert withstands over 800-lbs pull and provides the greatest strength to tie in the front body panels. NEUSPEED Strut Tie-Bars fit with all standard factory equipment, and all service work is performed in the normal manner. NEUSPEED was the first... and is by far the best strut tie-bar on the market. |
|
|
|
|
|
|
Neuspeed Sway Bars
|
If your goal is to squeeze the highest level of performance out of your car, NEUSPEED sway bars are race-engineered to work in perfect harmony with all other suspension components, stock or aftermarket. With NEUSPEED, you get the ultimate in handling, safety and appearance. NEUSPEED sway bars are mandrel bent (which eliminates the gouges at the bends) using only aerospace quality 6150 steel that does not require heat treating- a process which can distort the bar and leave a rough finish. The ends are machined (in most applications where possible) to use precision ball-joints for precise control and alignment. Polyurethane bushings and custom formed brackets utilizing grade eight or better hardware make mounting very easy. Both front and rear sway bars feature a highly engineered bolt-on system of light-weight design that directly relates to improved performance. After being thoroughly inspected by NEUSPEED in-house QA people, a liquid-look, gloss black powder-coat finish is applied. These are the same sway bars used by winning drivers in SCCA, NASA, IMSA and SOLO racing. When you purchase a NEUSPEED sway bar, you are guaranteed long-lasting performance, quality and a limited lifetime warranty that you will never need to use. Clear, illustrated instructions are furnished with all NEUSPEED products. |
|
|
|
|
|
|
Neuspeed Springs - SofSport Springs
|
SofSport, High performance while retaining ground clearance. SofSport® springs were developed exclusively by NEUSPEED and designed specifically for performance driving in areas with snow and rough road conditions. While providing the same handling characteristics as our Sport kits, the NEUSPEED SofSport® springs do not lower the vehicle as much, allowing it to retain necessary ground clearance. |
|
|
|
|
|
|
Neuspeed Springs - Sport Springs
|
Sport Springs, Superior handling without harshness.The perfect solution if your goal is to lower your vehicle to eliminate wheel-well gap, and improve handling without sacrificing a smooth ride. In fact, most drivers report that NEUSPEED Sports, with their progressive spring rates, actually give them a smoother ride than their stock springs, while increasing overall handling performance. |
|
|
|
|
|
|
Neuspeed Springs - Race Springs
|
Race Springs Ultra performance, very responsive. Whether you want the ultimate in all-out racing performance or a super-slammed race look for the street, these are the springs that all of the magazines are praising. Thoroughly race-tested, they provide superb handling and a much lower center of gravity. Aftermarket shocks are reommended. NEUSPEED race springs work best with Bilstein or Koni shocks. |
|
|
|
|
|
|
Neuspeed Front Lower Tie-Bars
|
|
|
|
|
|
|
|
Neuspeed / KONI Fully Adjustable Gas Shocks
|
Neuspeed / KONI Fully Adjustable Gas Shocks |
|
|
|
|
|
|
Neuspeed Sway Bars Bushing Kits
|
Bushing Kits for Neuspeed sway bars. |
|
|
|
|
|
|
Neuspeed Rear Lower Tie-Bars
|
|
|
|
|
|
|
|
Neuspeed X-Brace
|
Limited quantities - |
